Electromyograph Tests Manual 4 Channels PC-Based EMG+NCV+EP Software

Introduction:
The equipment records bioelectricity activity of nerve muscle for determining its function state, which combines with nerve conduction speed, to give patient an auxiliary diagnosis.
Checking contents: EMG(electromygram), MCS(motor nerve conductor velocity), SCS(sensory nerve conductor velocity), F wave, Hreflex, RNS(repetitive nerve stimulation), Blink Reflex, VEP(visual evoked potential), BAEP(brainstem auditory evoked potential), SEP(somatosensory evoked potential), etc.

Features:

1. Professional EMG/EP operation platform and perfect test items, complete each test in the shortest time.
2. Neuro and muscle navigation system, convenient in selecting test part.
3. Powerful normal values system, contrast with normal data automatically.
4. Flexible software design, configure system parameters according to requirements.
5. High-speed data collection, electromagnetic interference suppression, Photoelectric isolation and low noise.
6. Integrative hardware system, compact in configuration and easy in moving.

Performance:

• Main system part 
  A/D conversion resolution 16 Bit
  Sampling ratio 200kHz
  Analysis time 5-5000ms
  Stimulating frequency 0.1-50Hz
• Amplifier part
  Four-channel 
  Sensitivity 0.05μV-20mV/Grid
  Earth noise EMG <= 4μV(Vpp)
  EP <=0.1μV(Vpp) (1000 times in average)
  Common-mode rejection ratio >= 100dB
  50Hz Ban wave setting:
  Upper limit for Filter-frequency 20kHz
  Lower limit for Filter-frequency 1Hz
  Gain amplifies 25 times-400000 times
• Stimulator part
  Constant current 0.2-100mA
  Pulse width 50-1000μS
  Short circuit and overloading protection
• Auditory Stimulator 
  Stimulation wave 40Hz Short, Sound Stim
  Stimulation polarity nondense wave, dense wave and alternant wave.
  Sound strength 40-120db (5db per level) 
  Stimulation mode left, right, left & right
  Frequency of 40Hz carrier wave 500-8000Hz
• Visual stimulator 
  Mode tessellation, horizontal bar and vertical bar.
  Stimulation view all-view, half-view and quarter-view
  Resolution 3×4, 6×8, 12×16, 24×32, 48×64
  Flash stimulator all quench,left light,right light,l&r light

Physical characteristic:
Dimension 420mm*350mm*46mm(L×W×H)
Net weight 6KG

Accessories:

1.  Disk
2. Power Cord
3. Power Adapter
4. USB Cable
5. Audio Cable 
6. Earth Cable
7. Current Stimulator
8. One-off Bipolar Needle Electrode D039035408, 0.35*40mm, D039060706, 0.60*70mm
9. Reuseable Bipolar Needle Electrode R039035408, 0.35*40mm, R039060706, 0.60*70mm
10. Concentric Needle Connecting Wire
11. 1mm Connecting Lead Wire
12.  Disc Electrode
13.  Ring Electrode
14.  Surface Electrode
15.  Ground Electrode(Include lead cable)
16.  One-off Unipolar Needle Electrode
17.  From 1 to 2 Conversion Cable
18.  Surface Electrode Conversion Cable
19. Fuse 0.1A/250V, 5*20mm
20. Fuse F1.6AL250V, 5*20mm
21. Flash Stimulator
22.  Audio Stimulator